High-Capacity Blister Packaging Line User Requirements and Specifications for Ampoule and Vial Processing

Project Overview

A pharmaceutical enterprise has established a comprehensive User Requirement Specification (URS) for a high-capacity blister packaging line. The system is engineered to process ampoules and tubular vials (10 ml and 15 ml) into airtight blister formats while complying with cGMP, EMA, and FDA regulatory standards.

Core Technical Parameters

    • Throughput Capacity: Configured for a minimum output rate of 60 blisters per minute with combi-pack configurations, maintaining product loss below 0.1%.
    • Material Compatibility: Processes Alu-Alu, Alu-PVC, and Alu-PVDC material webs with hermetic sealing integrity.
    • Temperature Regulation: Integrated with continuous blowers and chilled water cooling to ensure ampoule discharge temperatures remain below 30°C to 35°C.

Automation & Inspection Architecture

    • Feeding & Orientation: Utilizes automated feeder systems with orientors and retainers to manage varied ampoule weights, sizes, and geometries from manual inlet chutes.
    • In-Line Quality Control: Incorporates online vision systems for empty pouch detection and chipped or irregular tablet recognition, with automated rejection routing for non-compliant blisters.
    • Control System: Powered by Siemens or Allen-Bradley PLC and HMI platforms featuring multi-level password security (Operator, Maintenance, Supervisor), recipe management, and process printing capabilities.

Material Compliance & Construction Standards

    • Product Contact Surfaces: Fabricated from stainless steel AISI 304 or AISI 316/316L with electropolished surface finishes superior to Ra 0.5 micron.
    • Elastomers & Seals: Utilizes FDA-compliant non-metallic materials including PTFE, EPDM, Kalrez, and silicone.
    • Environmental & Safety Ratings: Process areas are rated to IP55 with exterior cladding in AISI 304 stainless steel, maintaining external touch temperatures below 55°C via chemical or mineral insulation.