Engineering Evaluation: Integrated Alu-Alu Blister, Cartoning, and Stretch-Banding Line

JORNEN successfully commissioned and delivered a fully synchronized solid dosage Blister Packaging Line to a pharmaceutical manufacturer. This turnkey project seamlessly integrates primary blister packaging, secondary cartoning, precise checkweighing, and end-of-line stretch-banding into a cohesive, highly efficient production workflow.

1. Primary Packaging & GMP Segregation
For the Alu-Alu cold forming process, the Blister Packaging Machine utilizes an advanced synchronous brush-and-track feeding mechanism. Tablets are swept into a dedicated track, which indexes in strict synchronization with the moving web to accurately place the dosage into the cavities.

To strictly adhere to GMP facility design, the transfer interface between the blister machine and the cartoner utilizes an extended conveyor belt. This architectural choice allows for physical wall partitioning, effectively isolating the primary blister machine (Classified Cleanroom) from the secondary packaging equipment (Non-Cleanroom).
2. Secondary Packaging (Cartoning)
The downstream Cartoning Machine employs a hybrid kinematic design. While functioning on an intermittent motion baseline, it achieves significantly higher output speeds than traditional intermittent cartoners by integrating a continuous-motion carton pick-up rotary device and a continuous blister infeed conveyor chain.
3. Quality Control & End-of-Line (EOL) Bundling
After carton closure, 100% of the production is verified by an in-line high-precision checkweigher. Any faulty cartons (e.g., missing blister cards or missing leaflets) are automatically rejected from the workflow. Validated cartons are then transferred to the End-of-Line (EOL) Packaging Machine, where a stacking unit collates them into bundles before the stretch-banding module tightly wraps them in clear plastic film for secure palletization.