Field Service Report: Alu-Alu DPP260K2 Blister Packaging Machine

Operational demonstration of the Blister Packaging Machine for Alu-Alu formats is available here:

Alu-Alu DPP260K2 blister packaging machine cold forming field service and operational training

Field Service Record: Alu-Alu DPP260K2 Commissioning

Equipment: Alu-Alu DPP260K2 Blister Packaging Machine
Service Date: 21/08/2014
Service Technician: Sun Changhu

Safety Configuration and Hardware Verification

A comprehensive inspection of the DPP260K2 safety infrastructure was conducted. All physical safety alarm plates and interlock panels were verified to be in exact accordance with the technical operation manual. The hardware safety configurations were documented as fully adequate for standard cold-forming production environments. No component replacements were required during this diagnostic and maintenance cycle.

Technical Training and System Handover

The on-site technical personnel underwent a collaborative safety operation training session governed by standard equipment safety rules. The JORNEN service technician executed a joint-training protocol alongside the facility’s operators, ensuring direct knowledge transfer regarding Alu-Alu-specific machine controls and operational mechanics.

Equipment Status and Engineering Feedback

Post-service evaluation recorded the equipment operating stably within specified parameters. The maintenance and fault-handling procedures were executed in strict compliance with standard technical protocols. Operational feedback from the site engineers acknowledged the robust equipment design and noted that the future integration of automated parameter setups for individual stations could further expedite format changeovers.