Technical Guide: Forming Material (PVC) Installation for the DPP260 Blister Machine

To maximize production uptime and streamline the frequent replacement of forming materials, the DPP260 blister packaging machine is engineered with a highly efficient dual-reel loading architecture.
1. Dual-Reel Station Design: The machine features two distinct material reel stations: an outer station (①) and an inner station. As the machine operates and the outer PVC reel depletes (reducing in diameter), operators can transfer this smaller reel to the inner station. A new, full PVC reel is then mounted on the outer station on standby, allowing for rapid splicing and minimal changeover downtime.
2. Mechanical Alignment: The axial position of the PVC reel can be easily adjusted and secured by loosening the quick-release locking screw (⑧) and repositioning the fixing ring (⑨) to ensure perfect web alignment.
3. Automated Safety Interlocks: The material feeding system is integrated with advanced detection sensors. In the event of material depletion or an unexpected web breakage, the sensor immediately triggers an acoustic alarm and automatically halts the machine, preventing product waste and downstream mechanical faults.
4. Critical PVDC Orientation Note: If utilizing PVDC (Polyvinylidene Chloride) as the forming web instead of standard PVC, operators must strictly ensure the material is threaded with the coated (sealant) side facing upwards. This guarantees proper thermal bonding with the aluminum lidding foil at the heat-sealing station.

PVC material installation diagram for DPP260 blister packaging machine