Blister packaging represents the global standard for the unit-dose packaging of solid dose pharmaceuticals (tablets, capsules, and lozenges). The primary architecture consists of a formable cavity (web) and a lidding seal, designed to provide critical barrier protection against environmental factors while ensuring product integrity and tamper resistance.
In the pharmaceutical sector, the predominant configuration is the Push-Through-Pack (PTP). This design utilizes a semi-rigid cavity flexible enough to dispense the dosage, paired with a brittle lidding foil (typically aluminum) that fractures under thumb pressure. The production of these packs is executed via a continuous form-fill-seal process on specialized blister machinery, utilizing either platen-type or rotary-type sealing mechanisms.
During thermoforming, a plastic web is indexed through a heating station where upper and lower plates soften the material. The pliable film enters a forming station where positive air pressure (4 to 8 bar) shapes the cavities against a forming mold. For complex or deep-draw cavities, a mechanical “plug-assist” is employed to physically pre-stretch the film, ensuring optimal and uniform wall thickness distribution throughout the cavity.
Cold forming utilizes mechanical stamps to press an aluminum-based laminate film directly into a mold without the application of heat. The primary engineering advantage of Cold Form Foil (CFF) is its near-absolute barrier against moisture and oxygen ingress, significantly extending product shelf life. Operational considerations for cold forming include comparatively lower production speeds than thermoforming, lack of product visibility, and an increased blister card footprint due to the geometric limitations of drawing aluminum.
Rigid Polyvinyl Chloride (RPVC) serves as the baseline thermoformable web, offering high structural rigidity devoid of plasticizers. Standard pharmaceutical RPVC thickness ranges from 200μm to 300μm (typically 250μm). To enhance the baseline moisture and oxygen barrier properties of standard PVC, the material is frequently upgraded via PVDC coatings or through lamination with advanced polymers such as PCTFE (Aclar) or COC (Cyclo Olefin Copolymer). In these multi-layer laminates, the PVC layer provides the structural thermoformable backbone.