Schematic Diagram: PVC Convey Device and Sensor Regulated Feed Mechanism

The forming material (PVC) convey device in the DPH series Blister Packaging Machine utilizes a motorized, friction-driven feed mechanism. The system is engineered to maintain optimal web tension through a closed-loop sensor architecture, ensuring precise and intermittent material indexing.

1. Sensor-Regulated Feed Mechanism
During continuous operation, the PVC web [9] is routed past the turning roller [4] and splicer. The web is propelled by the primary PVC convey roller [1], which is actively engaged by the eccentric press roller [2] to generate drive friction. The feed rate is dynamically controlled via a gravity-assisted swing arm (dancer arm) [6]:
  • As the motorized roller dispenses PVC, the swing arm lowers. Upon contacting the lower proximity sensor [7], the convey motor temporarily halts.
  • As the downstream traction mechanism pulls the web into the forming station, the swing arm rises. Contact with the upper sensor [5] instantly reactivates the motor, creating a seamless, intermittent buffer loop.
2. Material Threading and Changeover Protocol
For initial web threading or roll replacement, the operator must manually disengage the drive friction. Pulling the eccentric handle [3] downwards retracts the press roller [2], creating sufficient clearance. The PVC web is then guided between the two rollers. Pulling the handle upward re-engages the mechanical pressure, securing the web against the convey roller [1] to resume automated friction transport.
Schematic diagram of DPH Series Blister Packaging Machine forming material PVC convey device
1. PVC Convey Roller | 2. Eccentric Press Roller | 3. Eccentric Handle | 4. Turning Roller | 5. Upper Sensor | 6. Swing Arm (Dancer) | 7. Lower Sensor | 8. Gravity Roller | 9. Forming Material (PVC)