The Development of the Blister Machine in China

💡 Historical Note on Terminology:
Readers should note that the historical classification of blister packaging machines in China differs slightly from modern terminology. To avoid confusion, please reference the following definitions:
1. Rotary Style Blister Machine: Historically referred to machines where both forming and heat-sealing were performed by rotating rollers (PVC was vacuum-formed via negative pressure directly against the forming roller). This specific mechanical type is virtually extinct today.
2. Platen Style Blister Machine: Corresponds exactly to the modern concept of flat-plate (platen) blister machines.
3. Rotary-Platen Combination Style Blister Machine: Historically referred to machines utilizing a flat platen for positive-pressure forming and a roller for heat-sealing. In today’s industry, this configuration is simply known as a Rotary Style Blister Machine.

Entrusted by Chen Husheng, Secretary General of the China Association for Pharmaceutical Equipment (CAPE), I would like to detail the developmental trajectory of Blister Packaging Equipment in China. My personal insights are entirely open to discussion and critique from industry peers.

The Origin of the Domestic Blister Packaging Machine

I recall that in March 1986, I visited Mr. Pu Yuanming, Director of the Management Department at Shanghai Mechanical & Electrical Industry Co., Ltd., while he was recovering from an illness at home. I sincerely sought his advice on the primary direction for new product development. Perhaps moved by my earnestness, he directed me toward a highly promising field: pharmaceutical equipment. Back then, this industry was a blue ocean in China. Only a few manufacturers were capable of producing low-to-mid-tier equipment, while precision machinery like pharmaceutical packaging equipment was primarily imported at exorbitant prices—a significant challenge given China’s foreign exchange shortage at the time.

Fortunately, I had the opportunity to attend the 1986 National Pharmaceutical Machinery Exposition in Wuhan. There, I observed a platen-style blister machine (a manual, multiple-single-station, semi-automatic unit) produced by Jidong Medical Device Factory. Though the machine appeared simple and crudely manufactured, it drew a massive crowd. An idea sparked in my mind: why not integrate forming, feeding, heat-sealing, and cutting functions into one comprehensive, fully automated blister machine?

While researching the market prospects for such a product, I visited Hu Heli, former President of the State Pharmaceutical Administration (SPA, formerly the Shanghai Design Institute of Pharmaceutical Machinery), and Mr. Zhang Ruhao, former Deputy Director of the Pharmaceutical Machinery Division of the SPA and Shanghai TCM Factory 1. Mr. Zhang was incredibly supportive. His words bolstered my confidence: “The authority issued a notice in 1984 regarding the urgent popularization of blister packaging for medicines, and the SPA has invested in Guangzhou to develop PTP aluminum foil and PVC production lines.”

After independently raising funds and undergoing three years of painstaking trial-and-error research, we launched our first platen-style blister packaging machine in September 1989. The original blueprints, dated April 19, 1989, remain preserved today. The structure and operating principles of this machine were as follows:

  1. All stations and cams were driven by the machine’s main shaft, moving up and down to complete forming, heat-sealing, and cutting while the upper and lower molds punched closed. When the lower mold disconnected from the pull roller, it advanced the PVC and aluminum foil via intermittent motion.
  2. The pull roller was driven by quartered sheave wheels, where a quarter of the roller’s circumference equaled the required stroke length. The machine was also equipped with a device for online printing.

It has now been exactly 30 years since Jornen Packaging Machinery Factory in Ruian, Zhejiang, was officially registered on September 16, 1989.

At the 1989 National Pharmaceutical Machinery Exposition, sponsored by the Southern Company (the former Sales Department of Far East Pharmaceutical Machine’s General Factory), our blister machine caught the attention of Mr. Chen Linxing from Shanghai-based SINE Pharmacy. SINE’s technical director noted that the machine’s structure and principles aligned perfectly with his own conceptual designs. At a subsequent product appraisal meeting in Hangzhou, Mr. Chen, acting as a customer representative, highly praised the machine and offered invaluable advice for further refinements.

In 1991, the machine passed provincial appraisal and earned the title of “Competitive Product of Zhejiang” from the Zhejiang Economic and Trade Commission. Simultaneously, it received the Gold Award for “New Technology and Product” from the State Science and Technology Commission.

China’s first rotary-style blister packaging machine was designed by Mr. Zhu Jiesheng of SINE on March 2, 1980. Mr. Xu Dawu, technical director of the former Jinzhou Packaging Machinery Factory, led a team to study at SINE in the fall of 1980. This machine won the second prize for Science and Technology Achievement in Shanghai in 1982 and passed SPA accreditation in 1983. It had already been put into factory use by the spring of 1982.

To summarize: China’s first domestic rotary-style blister packaging machine was designed in 1982 by Zhu Jiesheng, while the first platen-style automatic blister packaging machine, designed by Yang Yijun (founder of JORNEN), emerged in 1989. The first rotary-platen combination machine was developed by Mr. Lin Deping, chairman of Zhejiang Mingtian Machinery Co., Ltd., and introduced to the market in 1996.

It became evident that a new generation of machinery was being invented roughly every seven years.

Advantages and Disadvantages of the Three Machine Styles

  1. Rotary Style Blister Machine:
    (1) The 220-type blister machine designed by Mr. Zhu Jiesheng operated via rotary internal heating with a cutting frequency of 55 punches/min. Meanwhile, most other domestic models utilized far-infrared radiation heating tubes, limiting their cutting frequency to 33 punches/min.
    (2) The forming roller featured a water-cooling circulation system. As the PVC sheet entered the heating zone, temperatures had to be strictly controlled within the die holes, with excess heat removed by the mold’s cooling system. Furthermore, it relied solely on negative-pressure vacuum forming, pumping air out of the mold cavity to create a pressure differential capped at 1 atmospheric pressure. Consequently, a higher forming temperature was required, controlled manually via voltage regulation. This imprecise control often pushed temperatures dangerously close to the PVC melting point (chlorine molecules decompose at 180℃), leading to thinner blister bottoms, uneven wall thickness, and suction damage. Vacuum forming demanded exceptionally high-quality PVC and struggled with sealing consistency.
    (3) Due to complex die and mold manufacturing limitations, it could not handle intricately shaped medicines.
    (4) Its primary advantage was seamless synchronization between the forming and sealing stations.
  2. Platen Style Blister Machine:
    This mechanism utilizes flat-plate platen forming. After heating, the PVC is pulled into the mold. The compressed air pressure is relatively high (typically 0.5-0.7 MPa in positive-pressure platen forming), allowing the required heating temperature to drop to around 110℃ (PVC softens at 90℃). The larger heating area means the blister is stretched and formed robustly rather than merely being sucked into a cavity. This yields uniform wall thickness and drastically reduces suction damage. Platen forming lowers the required PVC quality and, due to easier mold processing, allows for deeper blisters (up to 35mm).
    Consequently, platen-style machines are ideal for packaging ampoules, vials, liquid/ointment measuring packs, and irregularly shaped objects. They also support cold-forming techniques for Alu/Alu packaging. Beyond pharmaceuticals, they dominate food, cosmetics, electronics, and medical device packaging—areas where rotary machines fail to compete. The main drawback is its intermittent motion compared to continuous rotary running, which initially limited operating speeds to around 25 punches/min. JORNEN has since introduced multiple modifications to reduce index time and extend heat-sealing duration. Today, with servo drives, the cutting frequency of our DPP260, 350, and 500 models reaches 65 punches/min.
  3. Rotary-Platen Combination Style Blister Machine:
    Combining platen forming with rotary sealing significantly improves efficiency. The first-generation DPH220 high-speed machine, designed by Mr. Lin Deping, achieved a cutting frequency of 80 punches/min (Modern domestic models with full servo drives can now reach up to 200 punches/min). However, this model remains constrained by its rotary sealing mechanism, making it less suitable for large or deeply formed, complex-shaped objects.

The Development History of China’s Blister Packaging Machine

  1. In the 1980s, Beijing Double-Crane Pharmaceutical Equipment Co., Ltd. manufactured a vertical rotary-style blister machine (imitating Japan’s CKD) with a cutting frequency of 50 punches/min, though it saw limited sales. In the early 1990s, they launched the 170 and 200 platen-style machines and were the first to connect a blister machine with a cartoning machine, creating a complete blister production line. Led by Mr. Li Qiyun, their strong engineering foundations provided me with invaluable learning opportunities during my visits.
  2. In the early 1980s, Oshi (formerly Jinzhou Packaging Machinery Factory) imitated the FA3 platen-style machine by Italy’s FAC, using a stepping motor for the index roller. Due to synchronization issues between forming and sealing, only five were built, and Oshi pivoted exclusively to rotary machines. By 1998, Oshi’s core members formed Jinzhou Wande, later joining the German UHLMANN Group in 2011 to focus on high-end manufacturing.
  3. Regarding feeding devices, early 1980s rotary machines simply placed the feed hopper directly atop the forming roller. While suitable for sugar-coated tablets, it struggled immensely with capsules, antibiotic pills, and irregular shapes. In 1987, Mr. Lin Deping (co-founder of Feiyun Machinery Factory) resolved this by designing a planetary-type universal feeder, a highly effective innovation rapidly adopted by domestic peers.
  4. In 1992, Mr. Xie Zicheng indicated that the pharmaceutical industry would soon demand blister packaging for ampoules. In response, JORNEN designed a unique clamp-pack structure: a press-in station gently but firmly secures vials and ampoules into the pockets, preventing them from falling out and protecting them against impact, while fully synchronizing with online printing.
  5. In 1994, Mr. Ruan Zhichi of Xinpai Machinery Co., Ltd. (formerly Ruian Xinfei) introduced a rectilinear reciprocating motion index structure. This simplified index adjustments for platen machines, paving the way for accurate eye-mark registration on printed aluminum foil.
  6. Shanghai JORNEN first successfully linked a blister machine with a cartoning machine in 2002, achieving 70 cartons/min. Today, our high-speed blister lines, integrated with 400-series cartoners, achieve outputs of 400 cartons/min.
  7. In 2016, Jack Yang, General Manager of JORNEN Machinery, innovated the BMMP270H high-speed blister packaging machine, realizing the industry’s long-standing dream of running a platen-style model at extreme high speeds. Its features include:
    A. The operating zone adopts a cantilever structure, which is convenient for daily cleaning and maintenance.
    B. The driving zone is on the back of the machine and completely separated from operating zone at the front, thus avoiding cross-contamination.
    C. A connecting-rod gear system controlling mold opening/closing. When the cam drives the connecting rod to pull the toggle nearly 180° straight up (leveraging mechanical advantage), the vertical output force generated is exponentially greater than the input force. This radically reduces cam pressure while easily supporting forming and heat-sealing areas several times larger than traditional 260 models.
    D. Full servo high-speed operation reaching 150 punches/min. The sealing-to-cutting speed ratio can be smoothly adjusted via the HMI from 1:2 to 1:3.
    E. Highly straightforward and rapid format changeovers.

Conclusion

Over the past 40 years, professionals across the industry have collaborated, learned from one another, and integrated advanced foreign technologies to elevate China’s Blister Packaging Machinery to international standards in both performance and aesthetics. Today, our self-developed machines are exported globally in massive quantities, including to highly developed markets in Europe and North America, making profound contributions to GMP reform and the overall advancement of China’s pharmaceutical enterprises.

Furthermore, these milestones would not have been possible without the correct guidance and strict supervision of industry associations. From the 1994 National Seminar on Blister Packaging Machine Quality in Ruian, to the national spot inspections in 1995 and 1998, and numerous GMP training seminars and international study trips, their dedicated efforts have been clear for all to see.

Yang Yijun
The founder of the Jornen Machinery
23-07-2019